Deleting A Power-On Or Setup Password - HP Compaq dc5000 MT Reference Manual

Desktop Management
3. When the key icon appears, type your current password, a slash (/) or alternate delimiter
character, your new password, another slash (/) or alternate delimiter character, and your new
password again as shown:
current password/new password/new password
✎
Type carefully; for security reasons, the characters you type do not appear on the screen.
Enter
4. Press the
The new password takes effect the next time you turn on the computer.
✎
Refer to the "National Keyboard Delimiter Characters" section in this chapter for information
about the alternate delimiter characters. The power-on password and setup password may also be
changed using the Security options in Computer Setup.

Deleting a Power-On or Setup Password

1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
To delete the setup password, run Computer Setup.
2. To delete the Power-On password, go to step 3.
To delete the Setup password, as soon as the computer is turned on, press and hold the
key until you enter Computer Setup. Press Enter to bypass the title screen, if necessary.
✎
If you do not press the
again, and press the
If you are using a PS/2 keyboard, you may see a Keyboard Error message—disregard it.
3. When the key icon appears, type your current password followed by a slash (/) or alternate
delimiter character as shown:
current password/
Enter
4. Press the
✎
Refer to "National Keyboard Delimiter Characters" section in this chapter for information about
the alternate delimiter characters. The power-on password and setup password may also be
changed using the Security options in Computer Setup.
3–12
key.
F10
key at the appropriate time, you must turn the computer off, then on
F10
key again to access the utility.
key.
360201-002 Service Reference Guide, dc5000
F10