Io Function; Input Port Function; Trigger Input; Line Status - Omron STC-MBS322U3V Product Specifications And User's Manual

8

IO Function

This chapter describes the IO functions.
In this chapter, the IO Port places as "Line". The follow chart details the relationship of the Line and IO Port.
GenICam Parameters
LineSelector IEnumeration Type
LineMode IEnumeration Type
LineInverter IBoolean Type
LineStatus IBoolean Type
LineSource IEnumeration Type
UserOutputSelector IEnumeration Type
UserOutputValue IBoolean Type
8.1

Input Port Function

This function sets the input on Line Mode, then assigns Line as the input.
The following functions can be assigned as input.
When select "input" assign port at the Trigger Source, the input signal can be assigned as Trigger.
The input signal can be switched to Active-Low (Line Inverter: true) or Active-High (Line Inverter: false).
(*) When the Line polarity changing by Line Inverter, the active polarity of input trigger signal is changed.
This function monitors the signal status on the input Line.
The High level (Line Status: true) or Low level (Line Status false) status can be seen through the software.
STC-MBS322U3V / STC-MCS322U3V / STC-MBS510U3V / STC-MCS510U3V
Product Specifications and Use's Guide
IO Port Signal Name
Pin No.
2 GPIO2
3 GPIO1
4 GPIO0
Select Line
Switch input / output direction for the Line that was selected at LineSelector.
Input: set as input, Output: set as output
Switch polarity inversion ON / OFF for the Line that was selected at LineSelector.
False: polarity inversion Off (Active-High),
True: polarity inversion On (Active-Low)
Line status (High / Low)
Set function for the Line that was selected at LineSelector
Select UserOutput
Switch voltage level of UserOutput that was selected at UserOutputSelector
False: Low voltage level, True: High voltage level
Line number
Line2
Line1
Line0
No.15S013-02
35/67