Table of Contents
Advertisement
10.6
Digital IO Control
Name
Line Selector
Line Mode [Line Selector]
Line Format [Line Selector]
Line Source [Line Selector]
Line Inverter [Line Selector]
Line Debounce Time [Line Selector]
Line Status [Line Selector]
Line Status All
Use Output Selector
Use Output Value [Use Output Selector]
10.7
Logic Block Control
Name
Logic Block Selector
Logic Block Function [Logic Block Selector]
Logic Block Input Number [Logic Block
Selector]
Logic Block Input Selector [Logic Block
Selector]
Logic Block Input Source [Logic Block Input
Selector] [Logic Block Selector]
Logic Block Input Inverter [Logic Block Input
Selector] [Logic Block Selector]
10.8
Software Signal Control
Name
Software Signal Selector
Software Signal Pulse [Software Signal
Selector]
STC-MBS43POE / STC-MCS43POE
Product Specifications and User's Guide
Description
Selects the physical line (or pin) of the external device connector or the
virtual line of the Transport Layer to configure.
Controls if the physical Line is used to Input or Output a signal.
Controls the current electrical format of the selected physical input or
output Line.
Selects which internal acquisition or I/O source signal to output on the
selected Line.
Controls the inversion of the signal of the selected input or output Line.
Sets the value of the input line debouncer time.
Returns the current status of the selected input or output Line.
Returns the current status of all available Line signals at time of polling
in a single bitfield.
Selects which bit of the User Output register will be set by User Output
Value.
Sets the value of the bit selected by User Output Selector.
Description
Specifies the Logic Block to configure.
Selects the combinational logic Function of the Logic Block to
configure.
Specifies the number of active signal inputs of the Logic Block.
Selects the Logic Block's input to configure.
Selects the source signal for the input into the Logic Block.
Selects if the selected Logic Block Input source signal is inverted.
Description
Selects which Software Signal features to control.
Generates a pulse signal that can be used as a software trigger.
No.18S112-ES01
62/70
Advertisement
Table of Contents
