Table of Contents
Advertisement
Name
DeviceCharacterSet
DeviceReset
DeviceRegistersStreamingStart
DeviceRegistersStreamingEnd
DeviceTemperatureSelector
DeviceTemperature
TimestampLatch
TimestampLatchValue
Name
SensorWidth
SensorHeight
SensorShutterMode
WidthMax
HeightMax
BinningSelector
BinningHorizontalMode
BinningHorizontal
BinningVerticalMode
BinningVertical
DecimationHorizontal
DecimationVertical
RegionSelector
RegionMode
ImageComponentSelector
ImageComponentEnable
Width
Height
OffsetX
STC-MBS322U3V / STC-MCS322U3V / STC-MBS510U3V / STC-MCS510U3V
Product Specifications and Use's Guide
Description
Character set used by the strings of the device`s bootstrap registers.
Resets the device to its power up state.
Prepare the device for registers streaming without checking for consistency.
Announce the end of registers streaming. This will do a register set validation for
consistency and activate it.
Selects the location within the device, where the temperature will be measured.
Device temperature in degrees Celsius (C). It is measured at the location selected by
DeviceTemperatureSelector.
Latches the current timestamp counter into TimestampLatchValue.
Returns the latched value of the timestamp counter.
Description
Effective width of the sensor in pixels.
Effective height of the sensor in pixels.
Sets the shutter mode of the device.
Maximum width of the image (in pixels). The dimension is calculated after horizontal
binning, decimation or any other function changing the horizontal dimension of the
image.
Maximum height of the image (in pixels). This dimension is calculated after vertical
binning, decimation or any other function changing the vertical dimension of the image
Selects which binning engine is controlled by the BinningHorizontal and BinningVertical
features.
Sets the mode to use to combine horizontal photo-sensitive cells together when
BinningHorizontal is used.
Number of horizontal photo-sensitive cells to combine together. This increases the
intensity (or signal to noise ratio) of the pixels and reduces the horizontal resolution
(width) of the image.
Sets the mode used to combine vertical photo-sensitive cells together when
BinningVertical is used.
Number of vertical photo-sensitive cells to combine together. This increases the
intensity (or signal to noise ratio) of the pixels and reduces the vertical resolution
(height) of the image.
Horizontal sub-sampling of the image. This reduces the horizontal resolution (width) of
the image by the specified horizontal decimation factor.
Vertical sub-sampling of the image. This reduces the vertical resolution (height) of the
image by the specified vertical decimation factor.
Selects the Region of interest to control. The RegionSelector feature allows devices that
are able to extract multiple regions out of an image, to configure the features of those
individual regions independently.
Controls if the selected Region of interest is active and streaming.
Selects a component to activate data streaming from.
Controls if the selected component streaming is active.
Width of the image provided by the device (in pixels).
Height of the image provided by the device (in pixels).
Horizontal offset from the origin to the region of interest (in pixels).
No.15S013-02
60/67
Advertisement
Table of Contents
