Image Deployment; Summary; Dos Pxe - HP Blade dc72 Deployment Manual

5. Extract the contents of the DEPLOY.CAB file located on the installation CD at D:\SUPPORT\TOOLS\
(assuming D is the CD-ROM drive letter) into the Sysprep folder.
In the Sysprep folder, create a new text file called Sysprep.inf.
6.
7. In the new text file, add the following text:
[SysprepMassStorage]
PCI\VEN_8086&DEV_2822&CC_0104 = C:\SWSetup\SP33181\iastor.inf
8. At a command prompt, run:
C:\sysprep\sysprep.exe –factory –reboot –activated
The computer reboots after Sysprep executes.
9. To verify RAID drivers were installed, open Sysprep.inf located in c:\sysprep. It should read:
[sysprepcleanup]
Service=iaStor
10. At a command prompt, run:
C:\sysprep\sysprep.exe –reseal –reboot
11. Using the deployment server, create a deployment image of the reference computer.

Image Deployment

Summary

The Altiris Deployment Console allows for the use of either a DOS PXE image or a Windows PE PXE
image. Since the procedures are different for the two operating systems, the following procedures docu-
ment both approaches.

DOS PXE

1. Create a new folder called RSETUP in the Deployment Share.
2. Copy repset.exe and raidcfg.exe to RSETUP.
3. Create a new text file in RSETUP called CPQSETUP.txt.
4. In CPQSETUP.TXT, add the following text:
English
SATA Emulation
IDE
--
*RAID
AHCI
5