Installing and Cabling the HP CCI Solution
Removing a Blade PC
Installing Additional Memory
4-24
To remove a Blade PC:
1. Press the release latch 1.
2. Pull down the ejector lever 2.
3. Remove the Blade PC from the enclosure 3.
Removing a Blade PC
The Blade PCs support the following memory features:
Unregistered SODIMM DDR 333 memory
For more information, refer to QuickSpecs located on the HP
www.hp.com
website:
512MB system memory expandable to 1GB (32MB of system
memory is reserved for processor usage)
Two SODIMM slots
www.hp.com
Setup and Installation Guide