Powering Down The Enclosure; Removing A Blade Pc - HP BladeSystem bc1500 Setup And Installation Manual

Powering Down the Enclosure

Ä

Removing a Blade PC

Setup and Installation Guide
To perform a graceful shutdown of the enclosure and all the Blade
PCs, press the enclosure power button. If your operating system is
Microsoft Windows XP, the enclosure automatically performs a
graceful shutdown of all Blade PCs, and then removes power from the
enclosure.
To perform an emergency shut down of the enclosure and all Blade
PCs at the same time, press and hold the enclosure power button for
four seconds.
CAUTION: Performing an emergency shutdown on the enclosure may
result in the loss of any unsaved data on all Blade PCs.
To remove a Blade PC:
1. Press the release latch 1.
2. Pull down the ejector lever 2.
3. Remove the Blade PC from the enclosure 3.
Removing a Blade PC
www.hp.com
Installing and Cabling the HP CCI Solution
4-21