Important - Before You Start; Removing The Pc's Cover - HP Vectra VL410 Upgrade Manual

Hp vectra vl410: supplementary guide

Hide thumbs Also See for Vectra VL410:

Table of Contents

Upgrading and replacing hardware

Important - before you start

Read this section before installing any components in your PC.

WARNING

For your safety, never remove the PC's cover without first removing the power cord from the power outlet, and any

connection to a telecommunications network. Always replace the cover before switching the PC on again.

Caution

Static electricity can damage electronic components. Turn all equipment OFF. Don't let your clothes touch the accessory. To equalize

the static electricity, rest the accessory bag on top of the PC while you are removing the accessory from the bag. Handle the accessory

as little as possible and with care.

Desktop models

WARNING

For your safety, disconnect the power cord and all external cables.

1 Switch off the monitor and PC, disconnect all power cords and any telecommunication cables.

2 If necessary, unlock the cover (with the key) at the rear of the PC.

3 Open the latch and remove the cover.

4 Remove the front panel (if you are adding a front-access device).

Table of Contents