Table of Contents
Advertisement
Vigor2600VG
LED Indicators
ACT (Activity)
QoS
Phone(V1, V2)
WL
LINE
Printer
LAN
P1, P2, P3, P4
Back Panels
Printer
PWR
V1, V2
P1, P2, P3, P4
ADSL
Factory Reset
Blink when power is supplied to the router and the router is running normally.
ON when the QoS function is active.
ON when you off hook the phone
Blink when a phone call coming
ON when the wireless LAN is ready
ON when the ADSL line is showtime.
ON when the USB interface printer is ready.
These indicators are dual-color LEDs : Yellow means the port is connected to a
10Mbps device, and Green indicates the connected device is 100Mbps.
ON when the connected network device has been linked up correctly. Blinking
when there are Ethernet packets passing through the switch port.
To connect a USB based printer.
Only the power adapter comes with the package can be connected to the PWR.
To connect analog phone.
These switch ports should be connected to your local PCs.
To connect the ADSL cable to your telephone jack.
The restore default settings : While the router is running (ACT LED blinking),
press the button and hold for more than five seconds. The ACT LED begins to
blink rapidly, then release the button. The router will restart with the factory
default configuration.
Descriptions
Descriptions
3
Advertisement
Table of Contents
