Table of Contents
Advertisement
Troubleshooting
4.1 Troubleshooting
• If damage is suspected, check the "Before sending the
device for repair" (p. 59) section before contacting your
authorized IWATSU distributor or reseller.
• If no waveform is displayed even after performing
demagnetization and zero-adjustment (p. 37), internal
damage may have occurred. Contact your authorized
IWATSU distributor or reseller.
• If you must send the device out for repair, pack the device
so that it will not sustain damage during shipping, and
include a description of existing damage. We do not take
any responsibility for damage incurred during shipping.
(See "Precautions during shipment" (p. 1))
58
Advertisement
Table of Contents
