Preparation For Measurements; Connecting The Device To The Power Supply - Iwatsu SS-520 Instruction Manual

2.2 Preparation for Measurements

Before preparation for measurements, be sure to read
"Precautions during preparation for measurements" (p. 7).
Items to be prepared
• Model SS-520 or Model SS-521 Current Probe
• Model PS-54 or Model PS-52 Power Supply (option)
• Waveform measurement instrument (oscilloscope,
recorder, or etc.)

Connecting the device to the Power Supply

Procedures
1
Verify that the
in the OFF position and connect the power cord.
To lock the sensor head,
2
push the opening lever
until the
indication disappears.
At the moment, do not
clamp the conductor
being measured.
POWER
JAW UNLOCKED
Preparation for Measurements
switch on the PS-54 or PS-52 is
35