Philips AVENT SCD630/37 Troubleshooting Manual page 8

Maximum or minimum temperature is reached
Note: This situation is only applicable for the SCD630 model of the Philips Avent Baby monitor.
The parent unit will beep twice every 20 seconds when the baby unit reaches the chosen
maximum or minimum temperature. The parent unit shows a temperature whit this is exceeded.
Go to temperature settings to change the maximum and minimum temperature or to turn off the
temperature alert.
If this is not solving the issue, please contact us for further assistance.
The information on this page applies to the following models: SCD730/86 , SCD720/86 ,
SCD630/37 , SCD501/10 , SCD560/10 , SCD570/10 , SCD603/10 , SCD600/10 , SCD535/00 ,
SCD525/00 , SCD530/00 , SCD520/00 , SCD589/54 , SCD590/54 .
My Philips Avent baby monitor parent unit is
beeping
Your baby monitor beeps in a certain way to tell you what the problem is.

1 beep: parent unit is switched off

1 beep, every 20 seconds for the first 3 minutes, after that, every minute: parent unit is
low in battery

2 quick beeps every 20 seconds: temperature of the baby room is outside the range that is
defined by the user, temperature icon is shown on parent unit's screen (for model
SCD630 only)