Philips AVENT SCD630/37 Troubleshooting Manual page 5

because of potential
strangulation hazard.
The information on this page applies to the following models: SCD630/37 .
The camera of my Philips Avent Baby
monitor is not working
It can happen that video images are not displaying on your Philips Avent Baby monitor. This
does not always mean that the camera is broken. Use these possible causes and solutions to try
and solve the issue yourself.
The parent unit is in audio, vox or eco mode
Your Philips Avent Baby monitor comes with different modes. Press the mode button on the
side of the parent unit to select video. Available modes are:

video mode: video and sound are always on

audio mode: sound is always on, but video is inactive

vox mode: video and sound will turn off automatically if no sound is detected for 20 seconds.

eco mode: video, sound, and transmissions will turn off automatically if no sound is detected for
20 seconds.
A software error occured
You can reset the parent unit of your Philips Avent Baby monitor by simultaneously pressing the
power button and the navigation down button for one second. The parent unit will turn off