Table of Contents
Advertisement
automatically after one second. In order to turn the Philips Avent Baby monitor on, press the
power button again.
Did this not solve the issue? Please contact us for further assistance
The information on this page applies to the following models: SCD630/37 , SCD603/10 ,
SCD600/10 .
My Philips Avent baby monitor parent unit
buzzes
Interference can occur when the parent unit is out of range of the baby unit. Interference might
also occur if there are too many walls or ceilings between the parent unit and the baby unit or
when other 2.4 GHz wireless devices are switched on (e.g. microwave, Wi-Fi router).
Put the parent unit on a different place, closer to the baby unit, or switch off other wireless
devices.
The information on this page applies to the following models: SCD630/37 .
My Philips Avent Baby monitor beeps
It can happen that the parent unit of your Philips Avent Baby monitor beeps. Find out how to
solve this issue yourself.
Baby unit is turned off
When the baby unit is turned off, the parent unit will beep once show the out of range image.
Make sure that the baby unit is turned on.
The connection between the units is lost
Advertisement
Table of Contents
