Table of Contents
Advertisement
Requirements for Installation
1. Choose a proper place for installation
• Do not install this unit in a place where:
♦ Rough or dirty surface.
♦ Flammable gas or corrosive gas is generated.
♦ Ambient temperature 35°C and above or 5°C and below.
♦ Ambient temperature fluctuates violently.
♦ There is direct sunlight.
♦ There is excessive humidity and dust.
♦ There is a constant vibration.
♦ Not horizontal surface.
♦ The power source is instable.
• Install this unit on a stable place with the space as shown below.
2. Installation on horizontal surface
• Use the equipment on the horizontal and firm
place to keep the water inside the chamber
horizontal. If the equipment tilts and the
heater appears from the water surface, the
temperature on the area above the water
rises and a heater failure or operation stop
due to water level detector function may
occur.
• The weight of main unit is approximately
14kg. Carry and install the equipment
carefully by two or more persons.
Over 50cm
Before Using This Unit
Over 50cm
Over 50cm
5
Over 50cm
Advertisement
Table of Contents
