Table of Contents
Advertisement
Control Panel (Keys)
7
8
No.
Name
1
SET key
2
▲ key
3
▼ key
4
Water
lever
flicker
5
Press increase lamp
flicker
6
Interlock lamp flicker
7
Temperature lamp
8
Time lamp
9
Heating lamp
10
Sterilizing lamp
11
End lamp
12
Time display
Description and Function of Each Part
4
9
This key is used to select temperature/time mode.
This key is used to increase the temperature/time parameter
This key is used to decrease the temperature/time parameter
lamp
When the sterilizer is short of water, the lamp is flashing, when add water
to the "standard" water level, the water level lamp will be on persistently.
the steam pressure in sterilizer ≥ 0.028Mpa, the indicator is light.
Close the lid, after rotating until closing of the upper and lower handle, the
indicator is light.
The temperature parameter.
When set the sterilization time or countdown, the indicator is light.
When the heater is in the working state, the indicator is light, in the
process of heat insulation, it is flashing.
When the sterilizer reaches the setting temperature (thermal insulation),
the indicator is light.
after the end of sterilization, the indicator is light (the buzzer warning).
The display sterilizing time
5
6
10
11
Function
11
12
1
2
3
Advertisement
Table of Contents
