Table of Contents
Advertisement
Installation Procedure
6
Close the door before operation
• Place the sterilizing drum with properly-piled items into the pot with the positioning mark on the
pot lid to be aligned to the center of the lower handle. Press the lid gently by hand and turn it
clockwise for the upper and lower handles to close completely and the safety lock to remain in
open position, and the safety lock will lock the upper and lower handles automatically when the
pressure in pot rises.
• The lock lever on the cover is held by the hook and does not move when the cover remains
open.
• Fully close the cover and slide the lock lever on the cover to the left side. If it is closed
inappropriately, the vapor blows out from the inside, which may cause a burns or injury to the
people around it.
• Do not press the hook and operate the lock lever for purposes other than maintenance of
equipment.
Before Using This Unit
9
Advertisement
Table of Contents
