Before Using This Unit; Requirements For Installation - Yamato BS 200 Instruction Manual

Requirements for Installation

WARNING!
1. Always ground this unit
 Connect the power plug to a receptacle with grounding connectors.
 Do not forget to ground this unit, to protect you and the unit from electrical shock in case of
power surge. Choose a receptacle with grounding connectors as often as possible.
 Do not connect the grounding wire to a gas pipe, or by means of a lightning rod or telephone
line. A fire or electrical shock will occur.
2. Choose a proper place for installation
 Do not install this unit in a place where:
 Rough or dirty surface.
 Flammable gas or corrosive gas is generated.
 Ambient temperature exceeds 35C.
 Ambient temperature fluctuates violently.
 There is direct sunlight.
 There is excessive humidity and dust.
 There is a constant vibration.
 Install this unit on a stable place with the space as shown below.
3. Do not use this unit in an area where there is flammable or explosive gas
 Never use this unit in an area where there
is flammable or explosive gas. This unit is
not explosion-proof. An arc may be
generated when the power switch is
turned ON or OFF, and fire/explosion may
result.
 To know about flammable or explosive
gas refer to page20 "List of Dangerous
Substances".

Before Using this unit

More than 15cm
Main Unit
Front side
4