Table of Contents
Advertisement
Daily Inspection and Maintenance
For the safety use of this unit, please perform the daily inspection and maintenance without fail.
Using the city water to this unit might attach dirt. Do inspect and maintain this point while performing daily
inspection and maintenance.
WARNING!
• Disconnect the power cable from the power source when doing an inspection or maintenance
unless needed.
• Perform the daily inspection and maintenance after the temperature of this unit return to its normal
state.
• Do not disassemble this unit.
CAUTION!
• Use a well-drained soft cloth to wipe dirt on this unit. Do not use benzene, thinner or cleanser for
wiping. Do not scrub this unit. Deformation, deterioration or discoloration may result.
Cleaning inside the chamber
• Use soft sponge to clean inside the chamber not to damage the surface inside the chamber. Do not
remove the filter on the bottom of the chamber when cleaning, if removed, the pipe fitting will get
clogged with dirt.
• The heater and sensor are provided on the bottom inside the chamber. Make sure not to bend or
damage the filter.
For any questions, contact the dealer who you purchased this unit from, or the nearest sales
division in our company.
Maintenance Method
17
Advertisement
Table of Contents
