Table of Contents
Advertisement
3.7
AC Wiring
The Model SK-5208 power supply delivers 24 VDC at 6A for smoke detector power,
notification device power, and accessory power. Figure 3-3 shows the AC connections to the
SK-5208 control panel.
To reduce the risk of electrical shock, make sure that all power has been turned off or disconnected before attempting
to connect the Model SK-5208 control panel. Do NOT apply power to this panel until all accessories are properly
connected.
Note: Note: All conduit and wiring connected to the SK-5208 must meet the applicable National Electric Code,
NFPA Standards, state, and local building code requirements. In all cases, the authority having
jurisdiction takes precedence.
P/N 151204
Figure 3-3
AC Wiring
Warning
firealarmresources.com
Control Panel Installation
3-9
Advertisement
Table of Contents
Troubleshooting
