Cancelling The Programme; Salt Indicator ( ); Rinse Aid Indicator ( ); Adjusting The Amount Of Rinse Aid - Blomberg GVN39S32 User Manual

Table of Contents

Advertisement

Operating the product
C
The machine will remain
silent in pause mode for
some time in order to
remove the water from the
machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.

Cancelling the programme

Open the door of the product Press
and hold the Programme Selection
/ Programme Cancel keys for 3
seconds. After the 3 - 2 - 1 countdown,
0:01 is displayed, close the door of
the product and wait for the draining
process complete. Draining is
completed in 2 minutes and the
machine gives an audible warning
when it is completed.
C
There might be residues
of detergent or rinse aid
in the machine and/or on
the pieces being washed
depending on the step
the programme you have
cancelled was in.

Salt indicator ( )

Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
Dishwasher / User manual

Rinse Aid indicator ( )

Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears
on the display of your machine.
Adjusting the amount of rinse
aid
1. After switching on your machine,
press the Menu key for 3 second.
C
Some models require
pressing Menu key once to
enter settings menu.
2. Using <- and +> keys, proceed to
"P:" on the display.
3. Set to the appropriate level with the
Selection key.
4. Press On / Off key to save the
setting.
No rinse aid dispensed in P:0 wash
position.
1 dose of rinse aid is dispensed in P:1
position.
2 doses of rinse aid are dispensed in
P:2 position.
3 doses of rinse aid are dispensed in
P:3 position.
4 doses of rinse aid are dispensed in
P:4 position.
37 / 47 EN

Advertisement

Table of Contents
loading

Table of Contents