Table of Contents
Advertisement
Installation
aquAvoid™ plus
(depends on model)
The aquAvoid™ plus system protects
against water leaks that may occur
at the hose inlet.Water contact with
the valve box of the system must be
avoided to prevent damage to the
electrical system. If the aquAvoid™
plus system is damaged, unplug the
product and call the Authorised Service
Agent.
A
As the hose set contains
electrical connections and
assemblies, never shorten
or lengthen the hose with
extension hoses.
A
Dishwashers door must be
aligned properly otherwise
hot steam can escape!
Danger of serious burns,
other injury or may damage
furniture.
Electrical connection
Connect the product to a grounded
outlet protected by a fuse complying
with the values in the "Technical
specifications" table. The manufacturer
shall not be liable for any damages
that will arise when the product is used
without grounding in accordance with
Dishwasher / User manual
the local regulations.
•
Connection must comply with
national regulations.
•
Power cable plug must be within
easy reach after installation.
B
Unplug the product after the
washing programme is over.
•
The voltage and allowed fuse or
breaker protection are specified
in the "Technical specifications"
section. If the current value of
the fuse or breaker in the house
is less than 16 Amps, have a
qualified electrician install a 16
Amp fuse.
•
The specified voltage must be
equal to your mains voltage.
•
Do not make connections via
extension cables or multi-plugs.
B
Damaged power cables
must be replaced by the
Authorised Service Agent.
B
If your dishwasher is
equipped with internal
illumination, lamp should
only be replaced by the
Authorised Service Agent
in case of failures that may
occur on the lamp.
B
If the product has a failure,
it should not be operated
unless it is repaired by the
Authorised Service Agent!
There is the risk of electric
shock!
11 / 47 EN
Advertisement
Table of Contents
