Blomberg GSN-1580 Manual

A
B
B
C
D
E
13
All manuals and user guides at all-guides.com
Upper basket with variable height setting (some
models)
The upper basket is equipped with a lifting mechanism
which enables you to change the height of the basket
without having to remove it from the dishwasher, even if
it is fully loaded.
The height of the upper basket was set to its lowest
position at the factory. To lift the upper basket to the “high”
( A ) position, hold it on one side and carefully pull it
upwards. To lift the opposite side of the basket, hold it
and pull it upwards in the same manner (
To lower the upper basket, hold the basket lever on one
side and carefully lower the basket without releasing the
lever. ( ). Repeat the procedure with the lever on the
B
opposite side of the basket. Make sure that both levers
catch at the same height.
Height setting with empty basket
In this model, the height setting of the upper basket may
be changed using the wheels which are mounted at two
different heights.
Release the latches on both the right and left tracks of
the upper basket by pushing them outwards (
Pull out the basket out completely ( ).
D
Place the basket back into the tracks at the desired height
( E ).
Push the latches back into the correct position.
).
A
2
3
1
).
C
Rack (depends on the model)
E
Depending on the size of the glasses and cups, the rack
height setting may be adjusted (
D
C 7
How to clean your dishwasher
Cleaning your machine at regular intervals ensures longer
product life and reduces the risk of reccurring problems.
Warning
Always unplug the machine and turn off the water
supply before cleaning.
Use a gentle household cleaner for the outside and
the door seals.
Clean the control panel only with a moist cloth and
clear water.
Cleaning the filters
Clean the filters and the spray arms regularly. A dirty
A
machine will have a negative effect on the cleaning results.
1 Main filter
2 Coarse filter
Micro filter
3
1. Remove the lower basket from the machine.
2. Turn the coarse filter to the right and pull it out in an
B
upward direction (
A
3. Pull out the main filter (
4. Press on the two tongues of the coarse filter and
remove the micro filter (
5. Clean the filters thoroughly under running water. Use
a brush if necessary.
6. Replace main filter
7. Replace the micro filter and the coarse filter into the
main filter. Twist it clockwise until it clicks in.
Warning
Do not operate your dishwasher without a filter.
C
Ensure that your filters are correctly installed
Clean the filters regularly.
).
C D E
).
).
B
).
C
1