Auxiliary Functions - Blomberg GVN39S32 User Manual

Operating the product

Auxiliary functions

Washing programmes of your
dishwasher are designed to obtain the
best cleaning effect, considering the
type of the soiling, soiling degree and
properties of the dishes to be washed.
Auxiliary functions allow you save from
time, water and power.
C
Auxiliary functions may
cause changes in the
programme duration.
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is
not compatible with the
programme will not be
active.
Rapid Clean Function
It shortens the time of the washing
cycle selected and decreases water
consumption by enabling washing
under higher pressure.
Super Gloss Function
It provides superior drying
performance.
PowerWash Function
dishes places in the right side of the
lower basket. It will give better results
to place the most soiled dish to the
right front side.
C
Do not try to remove the
PowerWash impeller!
Dishwasher / User manual
PowerWash
impeller located
under the lower
impeller helps
washing your
heavily soiled
Half Load function
It is used to operate the machine
without loading it completely.
1. Load your dishes in the machine as
you like.
2. Turn the machine on with On/Off
key.
3. Select the desired programme and
press the Half Load key.
While the function is active, the
selection indicator on the selected
function key will become on.
4. Close the door of the machine to
start the programme.
C
With the Half Load function
you can save both water and
power while using the lower
and upper baskets of the
machine.
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the
floor during the washing process. This
light turns off after the washing process
is complete.
C
Floor illumination is activated
automatically when the
washing programme starts
and remains lit until the end
of the programme.
C
Floor illumination cannot be
cancelled by the user.
33 / 47 EN