Kyocera ECOSYS PA2100CX Operation Manual page 142

Hide thumbs Also See for ECOSYS PA2100CX:
Table of Contents

Advertisement

Setup and Registration (System Menu) > System Menu
Item
USB Host
RAM Disk
Power Off Timer (models for Europe)
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Power Off Timer] > [►] key
Item
Power Off Timer
Disp. Status/Log
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Disp. Status/Log] > [►] key
Item
Disp. Status/Log
JobsDetailStatus
Jobs Log
Low Toner Alert
[Menu] key > [▲] [▼] key > [Device Common] > [►] key > [▲] [▼] key > [Low Toner Alert] > [►] key
Item
Low Toner Alert
Set whether or not the machine enters Power Off mode for USB host.
Value: Off, On
Set whether or not the machine enters Power Off mode for RAM Disk.
Value: Off, On
Select whether to turn off the power automatically after a period of inactivity.
Value: 1 hour, 2 hours, 3 hours, 4 hours, 5 hours, 6 hours, 9 hours, 12 hours, 1 day,
2 days, 3 days, 4 days, 5 days, 6 days, 1 week
Set the display method of the Status/Log.
If the ID card authentication is enabled, this setting is applied when you refer to the print job or
print job log from Command Center RX.
Value: Show All, My Jobs Only, Hide All
Value: Show All, My Jobs Only, Hide All
Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
Value: Off, On
Low Toner Alert: Set the toner level for notification of low toner.
The setting range is 5 to 100% (in 1% increments). Displayed when
[Off/On] is set to [On] and the [▼] key is selected.
NOTE
Selecting [Off] alerts you low toner when the amount of remaining toner becomes 5%.
6-21
Description
Description
Description
Description

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Ecosys pa2100cwx

Table of Contents