Kyocera ECOSYS PA2100CX Operation Manual page 135

Setup and Registration (System Menu) > System Menu
Item
SNMP
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
SMTP
POP3
RAW_Port
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
LPD
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
IPP
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
IPP over SSL
*1
Wi-Fi Direct
*1
Wi-Fi
Wired Network
Select whether to communicate using SNMP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [SNMP] is set to [On].
Select whether to send E-mail using SMTP.
Value: Off, On
Select whether to receive E-mail using POP3.
Value: Off, On
Select whether to receive documents using Raw Port.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [RAW_Port] is set to [On].
Selects whether to receive documents using LPD.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [LPD] is set to [On].
Selects whether to receive documents using IPP. To use the IPP protocol, select [Not Secure
(IPP&IPPS)] on IPP Security under Security Settings from the Command Center RX.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [IPP] is set to [On].
Select whether or not to use IPP over SSL.
Value: Off, On
NOTE
When selecting [On], it also requires a certificate for SSL. the default certificate is the
self-certificate of the machine.
Command Center RX User Guide
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [IPP over SSL] is set to [On].
6-14
Description
*2
*2
*2
*2, *3
*2, *3