Table of Contents
Advertisement
Settings
System
Network Configuration
Allows you to choose a way to connect your receiver to
the internet.
Before you begin, contact your ISP (Internet Service
Provider) to find out if your IP address is static. If it is
dynamic and you have a wired network, we recommend
using the procedure described below:
Connect the STB to your router using a LAN cable
before you start the configuration procedure. To begin
configuring your network connection, follow these steps:
1.
Press the MENU button on the remote control.
Select [Settings] > [System], and then press the ▶
2.
button.
3.
Select [Network configuration], and then press the
▶ button.
- In case of Wired connection press " button on
RCU and wait for automatic settings.
In case of "Wi-Fi Connection"
(supported WiFi devices TP-Link TL-WN823N, D-Link DWA 131, D-link DWA 171, D-Link DWA-182, EDIMAX EW-
7612UAN, ASUS USB-AC51)
Use the ▲▼ buttons to choose how do you want to connect your receiver to the internet.
• Wireless Network Scan – shows all available network.
- Use the ▲▼ buttons to select the network you want to connect and press " button on RCU to confirm.
• Enter the password of the connection
In case of "Wirless connection (Wi-Fi) via WPS"
• Press " button on RCU and within two minutes press PBC button on wireless router.
• If you would like to use WPS Pin Code, press PIN WPS option
In case of Wi-Fi is hidden (advanced option)
• Press " button on RCU and perform information displayed on yours TV.
42
Advertisement
Table of Contents
