Samsung GX-SM550SM User Manual page 17

Connections
 Connecting to a TV
\ Do not connect the power cord until you have made all the other connections.
\ When you change connections, turn off all devices before you start.
\ An HDMI cable outputs digital video/audio, so you don't need to connect an audio cable.
\ If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the
Digital Audio Out on the product to an audio system to hear audio.
\ Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
manual of your TV.
\ When you connect the product to your TV for the first time using an HDMI cable or connect it to
a new TV using an HDMI cable, it will automatically set the HDMI output resolution to the highest
supported by the TV.
\ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise
appears on the screen.
Supported HDMI CEC function on Remote control
Anynet+ is a convenient function that offers linked operations with other Samsung products that have the
Anynet+ feature. To operate this function, connect this product to an Anynet+ Samsung TV using an HDMI cable.
The STB supports HDMI Anynet+ functionality (extensions of the HDMI CEC standard). This makes it possible to
control the STB using a TV remote control (or to control the TV using the STB remote control in the case of the
automatic power on function).
Supported functions are:
• Automatic power off (when the Standby button is pressed on the TV, the TV goes to standby mode together
with the STB)
• Automatic power on (when the Standby button is pressed on the STB, the STB wakes up from standby mode
together with the TV)
• Remote control command sending; the following remote control buttons are supported: channel change,
menu, guide, channel list and arrows.
ANT IN Connection
Connect an RF coaxial cable(not supplied) to a satellite antenna and the ANT IN port at the rear of the STB.
17