Table of Contents
Advertisement
Settings
System
SYSTEM
You can check product information or reset the STB to
default settings.
Product information
This menu displays the product information: [Brand ID],
[Product ID], [Firmware version], [Downloader version],
[Software version], [Serial number] and [Last software
update].
Auto Turn off
This lets you set the STB go into the standby mode automatically from live mode if your STB is not being used
for the set up time.
When [Auto Turn off] is set to one of the available timeout values and the STB is idle for a certain period of
time, the product saves energy by turning off the STB automatically.
\ If the STB has been turned off or left unplugged for more than 1 week, the device may lose
authorization for satellite TV services. To restore satellite TV services, please contact your satellite
TV service provider.
Timeout to power saving mode
This lets you set the STB go into the deep standby mode automatically from the standby mode. The Power
saving mode means the most low power mode. STB is required to reboot when user press power button of
front panel or remote controller.
When [Timeout to power saving mode] is set to one of the available timeout values and the STB gets turned off
for a certain period of time on the standby mode status, the product saves energy the most by powering off the
STB automatically.
41
Advertisement
Table of Contents
