Media Sensing; Reflective Sensor - SATO Argox OS-200 User Manual

OS-214EX / OS-200
User Manual
Media Type
Fanfold Media

2.6 Media sensing

OS-214EX / OS-200 printers offer one type of media sensor: reflective. It is
used for detecting specific media types.

2.6.1 Reflective sensor

The reflective Sensor is positioned at 7mm from the left edge of media. The
black mark minimum width (horizontal) should be 14mm on the left edge of
media. The detection area, as illustrated below.
as black mark label.
Looks Like
Fanfold media is in continuous form, but it can
be used as non-continuous media, because its
labels are separated by folds. Some fanfold
media also has black marks or liners.
20
Description
The gap type label is same