SATO Argox OS-200 User Manual page 36

OS-214EX / OS-200
User Manual
 USB Interface Requirements
The Universal Serial Bus (USB) interface is compatible with your existing PC hardware.
The USB's "plug and play" design makes installation easy. Multiple printers can share
a single USB port/hub. The different usage of type A and B as below.
USB type A USB Flash drive, USB keyboard or USB Scanner.
USB type B PC to set printer.
 Serial (RS-232) Port
The required cable must have a nine-pin "D" type male connector on one end, which
is plugged into serial port located on the back of the printer. The other end of the
cable connects to a serial port on the host computer. For technical and pin-out
information, please refer to RS-232C in this manual.
 Ethernet Module Status Indicators
The indicators with two different colors help users understand status of Ethernet:
LED
Status
Both Off No Ethernet link detected.
Green
Amber
Speed LED
Link/Activity LED
Description
On: 100 Mbps link
Off: 10 Mbps link
On: link up
Off: link down
Blinking: activity
30