Troubleshooting; Led Diagnosis - SATO Argox OS-200 User Manual

OS-214EX / OS-200
User Manual

5 Troubleshooting

This chapter provides the information about printer problems and solutions.
Normally, when the printer is in not working properly, the "Power" LED
blinks continuously; while printing and communication between the host
and printer stops.

5.1 LED Diagnosis

Power and Ready LEDs blinking continuously indicates printer errors. To understand
the problem, please observe the Power and Ready LEDs and refer to the following
solutions:
LED Indicators: Power and Ready LEDs blink at the same tempo
Power LED Ready LED
ON ON
OFF OFF
Possible Problems
Miss-detect gap
Label stock out
Label stock not
installed
Label jam
Solutions
Check the label path
Check the label sensor
Supply the label roll
Install the label roll
Recover the jam
46
Remarks
If you use a
continuous label roll
and run under
Windows, select
continuous media.