Upgrade Bay - HP ProBook 6560b Maintenance And Service Manual

Upgrade bay

Description
500-GB, 7200-rpm hard drive
Before removing a drive from the upgrade bay, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the bottom door (see
Remove the drive from the upgrade bay:
1.
Position the computer upside-down with the right side toward you.
2.
Remove the four Phillips PM2.0×4.0 screws that secure the drive assembly into the upgrade bay.
3. Loosen the captive Phillips screw that secures the drive in the bay (1).
4. Push the drive tab (2) to release the drive from the computer.
Battery on page 60).
Bottom door on page 66).
Component replacement procedures
Spare part number
634919-001
69