Display Problems - HP Pavilion N3110 Using Instructions

Display Problems

If the notebook is on, but the screen is blank
Try pressing Fn+F1 to increase the contrast or Fn+F2 to decrease the contrast. (On TFT
displays, contrast control is not necessary and therefore is not available.)
Press Fn+F12 in case the internal display was disabled. (Do this three times to return to the
state you started from.)
If the notebook is cold, allow it to warm up.
If the screen is difficult to read
Check whether the display resolution is set to its default setting—800 × 600 for 12.1" display
or 1024 × 768 for larger displays. Check this in Start, Settings, Control Panel, Display,
Settings.
Try pressing Fn+F1 to increase contrast.
If part of the Windows desktop is not visible and you have to scroll down to see the taskbar
Your display resolution may be set to 1024 x 768 on a 12.1" display, instead of 800 x 600.
You need to set the monitor type to Laptop Display Panel (800 x 600).
1. Click Start, Settings, Control Panel.
2. Double-click Display.
3. Click the Settings tab.
4. Click Advanced.
5. Click the Monitor tab.
6. Click Change.
7. Click Next.
8. Choose "Display a list of all drivers..." and click Next.
9. For the model, select Laptop Display Panel (800 x 600) and click Next.
10. Click Next and then Finish.
11. Click Close.
12. Reduce the resolution to 800 x 600 pixels and click OK.
If an external display does not work
Check the connections.
Press Fn+F12 in case the external monitor was disabled. (Do this three times to return to the
state you started from.)
The external monitor may not be detected. In the BIOS Setup utility, try setting Video
Display Device to LCD/CRT in the Main menu. See
the BIOS Setup Utility.
You may also want to test the display with diagnostics. See
Diag Tools.
Configuring the Pavilion Notebook with
Testing the Pavilion Notebook with
19