HP Pavilion N3110 Using Instructions page 8

Hp pavilion n3110: supplementary guide
Table of Contents

Advertisement

8. Select and run the appropriate tests. Tests are not listed if no such hardware is detected. Press
the following keys to run tests:
ENTER
Runs the highlighted test.
F5 or SPACE
Marks or unmarks the highlighted test.
F6
Marks or unmarks all tests in the current menu.
F7
Marks or unmarks all tests in all menus.
F10
Runs all marked tests.
9. When you have finished running tests, press ESC to exit the advanced tests.
10. Optional: Save system and test information. Press F4 to create the Support Ticket log file,
HPSUPPT.TXT.
NOTE: If you ran the diagnostics from a floppy disk, the log file is stored on the
diskette. If you ran the diagnostics from the hard disk (by pressing F10),
the log file is stored on a hidden partition on the hard disk.
11. To exit, remove the diagnostic disk (if you used one), and press F3 twice to exit and reboot.
12. Optional: Check the Support Ticket log. The Support Ticket log file contains a list of all
test results and errors. If you ran the diagnostics from a floppy disk, you can open the
HPSUPPT.TXT file with a text editor, such as Notepad. To open a log file that was stored on
your hard disk, go to the C:\DMI\HPDIAGS directory and double-click HPSUPPT.EXE; this
displays the log file in Notepad.
8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents