Audio Problems; Display Problems - HP OmniBook 7100 Reference Manual
Hide thumbs
Also See for OmniBook 7100:
- Reference manual (146 pages) ,
- Service manual (87 pages) ,
- User manual (53 pages)
Table of Contents
Advertisement
Troubleshooting
Solving Problems
Audio Problems
If sound is not audible
• Roll the volume control wheel forward to increase the volume.
• Press Fn+Up Arrow several times.
• Double-click the speaker icon on the taskbar to ensure that Mute is not checked.
• For the OmniBook 7100 only, check settings in BIOS Setup.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. From the System Devices menu, check that Audio is enabled.
If sound doesn't record
• For the 7100 only, check settings in BIOS Setup (System Devices, Audio).
• Check software controls for recording sound (Start, Programs, Accessories,
Multimedia, Sound Recorders).
Display Problems
If the OmniBook is on, but the screen is blank
• Press the space bar to see if the computer is in Standby mode.
• Press Fn+F1 or Fn+F2 to adjust the display.
• Press Fn+F5 in case the internal display was disabled. (Do this three times to
return to the state you started from.)
• If the OmniBook is cold, allow it to warm up.
7-4
Advertisement
Table of Contents
