Table of Contents
Advertisement
e.
Top cover (see
f.
Display assembly (see
Remove the USB board:
1.
Disconnect the USB board cable (1) from the LIF connector on the system board.
2.
Remove the Phillips PM2.5×5.0 screw (2) that secures the USB board to the base enclosure.
3.
Remove the USB board (3) from the base enclosure.
Reverse this procedure to install the USB board.
Bluetooth module
Description
HP Integrated module with Bluetooth 2.1 wireless technology (does not include a Bluetooth
module cable)
Bluetooth module cable
Before removing the Bluetooth module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
ENWW
Top cover on page
62).
Display assembly on page
Battery on page
46).
68).
Spare part number
537921-001
605323-001
Component replacement procedures
81
Advertisement
Table of Contents
