9.
If it is necessary to replace the display hinges:
a.
Remove the six Phillips PM2.0×3.0 screws (1) secure the hinges to the display panel.
b.
Remove the hinges (2). The hinges are included in the Display Hinge Kit, spare part number
606878-001.
10.
If it is necessary to replace the WLAN antenna cables and transceivers:
a.
Release the tabs (1) built into the display enclosure shielding that secure the WLAN antenna
cables to the display enclosure.
b.
Release the WLAN antenna cables (2).
ENWW
Component replacement procedures
87