HP Pavilion DV5t-2100 Maintenance And Service Manual page 92

Description
●
14.5-in LED, HD, BrightView display assembly in shell white
●
14.5-in LED, HD, BrightView display assembly in watergarden finish
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
a. Memory module/wireless module compartment cover (see
b. Hard drive cover (see
c. Keyboard (see
d. Top cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board and release the display panel cable
from the routing clip (2) built into the fan/heat sink assembly.
2. Release the wireless antenna cables (3) from the opening (4) in the base enclosure.
CAUTION:
support the display assembly can result in damage to the display assembly and other computer
components.
3. Remove the four Phillips PM2.5×7.0 screws (1) that secure the display assembly to the computer.
82 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive on page
Keyboard on page
Top cover on page
Support the display assembly when removing the following screws. Failure to
46), and then remove the following components:
55)
61)
64)
Spare part number
606871-001
625046-001
Memory module on page 47)
ENWW