To Install Intel Speedstep Support; To Disable Automatic Cd-Rom Detection; To Install The Euro Key Patch - HP OmniBook XE2 Evaluator Manual

Corporate evaluator’s guide
Hide thumbs Also See for OmniBook XE2:
Table of Contents

Advertisement

Using Windows NT 4.0
Installing Retail Windows NT 4.0

To install Intel SpeedStep Support

If you've installed a retail version of Windows, you'll need to install the Intel
SpeedStep technology Applet if you have a dual-speed Pentium III processor.
Pentium III processors featuring Intel SpeedStep technology can dynamically
switch clock frequency and voltage, depending on whether the computer is
running on batteries or is plugged into AC power. When running in Battery
Optimized Mode, the processors run at a lower frequency and lower voltage,
significantly lowering CPU power consumption while still delivering high
performance. When a user plugs into an AC outlet, the notebook can
automatically switch to Maximum Performance Mode. You can also select
Maximum Performance Mode even while running on batteries. Switch modes
and set preferences by clicking the icon at the bottom of the screen.
The Intel SpeedStep files are available on Intel's web site.
1. After downloading the software, double-click the downloaded
SETUP.EXE.
2 When prompted, click NEXT.
3. Click FINISH to reboot your computer.
Upon successful installation, a SpeedStep icon appears on the bottom right
corner of the taskbar.

To disable automatic CD-ROM detection

Windows NT 4.0 automatically detects an inserted CD. However, this prevents
the OmniBook from automatically turning off after a period of inactivity if the
CD-ROM drive is present. To disable this feature:
1. From Start Menu, click Run.
2. Enter REGEDT32 then click OK.
3. Select the HKEY_LOCAL_MACHINE window and go to
SYSTEM\CurrentControlSet\Services\Cdrom.
4. Double click on Autorun.
5. Enter 0 and click OK.
6. Close the Registry Editor and restart Windows NT 4.0.

To install the Euro Key Patch

The Euro Key Patch allows you to type the Euro currency symbol in Windows
NT. The driver expands from the web package to its default location in
\OMNIBOOK\DRIVERS\EURO.
1. From Start Menu, click Run.
7-8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents