Using The Recovery Cd - HP OmniBook XE2 Evaluator Manual

Using the Recovery CD

Testing the Operation
Using the Recovery CD
You can use the OmniBook Recovery CD to recover an original OmniBook
build, or you can use it to install the HP custom software over a user-installed
alternate operating system.
The Recovery CD provides the OmniBook-specific drivers to configure your
custom system. The drivers for the operating system(s) that shipped on your
OmniBook are located both on the Recovery CD and the hard disk drive under
\OMNIBOOK\DRIVERS.
The OmniBook-specific drivers for all supported operating systems are located
on the OmniBook website at http://www.hp.com/omnibook. This website
contains the latest updates of software drivers.
The OmniBook Recovery CD contains the following:
Directory Contains
README.TXT file
Instructions for using the Recovery CD.
RECOVER \
Encoded image of the factory load—Windows 98, 95 or
Windows NT 4.0.
OMNIBOOK\
BOOTDISK
For creating your own copy of the Support Utility disk.
DRIVERS
Use these files to manually install individual audio, video,
infrared, and PC-Card (PCMCIA) drivers for the operating
system(s) that shipped with your OmniBook. A readme is
located in this directory that contains the driver installation
instructions.
3-2