Introduction - HP OmniBook 6000 Installation Manual

This document describes the setup and configuration requirements for the
HP Omnibook 6000/6200 notebook PC to function as an HAFM server. This is to be
used as a guide for configuring the PC, installing the software, installing the sliding
shelf into a cabinet, and basic operation of the HAFM server application.

Introduction

The high availability fabric manager (HAFM) server is a notebook PC with the HAFM
application installed. The applications provide a graphical user interface (GUI) for
operating and managing the switch and other HP products.
NOTE: The HAFM server and related applications provide a GUI to monitor and manage
HP products. The HAFM server is a dedicated hardware and software solution that should not
be used for other tasks. HP tests the HAFM application installed on the HAFM server, but does
not test for compatibility with other, third-party software. Modifications to the HAFM server
hardware or installation of additional software (including patches or service packs) may interfere
with normal operation.
The chapters in this document are as follows:
• "System
HAFM server operation.
• "PC Setup and
and CMOS setup.
• "Windows 2000 Setup and
system configuration.
• "Internet Information Server Setup and
Web server and FTP server installation.
• "HAFM Management Applications
installing HAFM software.
• "HAFM Server
HAFM server to a LAN and configuring its network information.
HAFM server installation guide
Requirements" on page 2–1 describes the hardware requirements for
Configuration" on page 3–1 describes the hardware configuration
Configuration" on page 4–1 describes operating
Configuration" on page 7–1 describes steps for connecting the
Introduction
Configuration" on page 5–1 describes
Installation" on page 6–1 describes steps for
1
1–1