Performance Problems; Power And Battery Problems - HP OmniBook 6000 Startup Manual

Troubleshooting Your Computer
Troubleshooting Techniques
If an external mouse is connected, the built-in pointing devices are normally disabled.
You can change this setting with the BIOS Setup utility—see "Using the BIOS Setup
Utility" on page 38.
Restart the computer: click Start, Shut Down, Restart.

Performance Problems

For best performance with Windows 2000, your computer should have at least 96 to
128 MB of memory (RAM).
If the computer stops responding
Press CTRL+ALT+DEL to end the application that is not responding.
Slide and hold the power button for at least four seconds to turn off and reset the
computer. Then press the blue sleep button to turn the computer back on.
If nothing happens, insert a straightened paper clip into the system-off switch on the
right side of the computer. Then press the blue sleep button to turn the computer back
on.

Power and Battery Problems

If the computer turns off immediately after it turns on
Battery power is probably extremely low. Plug in the ac adapter or insert a charged
battery.
If the computer keeps beeping
The computer beeps for 15 seconds when battery power is low. Save your work, shut
down Windows immediately, and insert a charged battery or plug in the ac adapter.
If the battery doesn't charge
Make sure the ac adapter is fully plugged into the power source and the computer, and
that the light on the adapter is on.
If you're using a power strip, remove the ac adapter from the power strip and plug it
directly into a wall outlet.
Make sure the battery is fully installed and locked in place.
46 Startup Guide