HP OmniBook 6000 Startup Manual page 36

Hp omnibook 6000: user guide

Hide thumbs Also See for OmniBook 6000:

Table of Contents

Making Connections

Using Plug-In Modules

3. Press the button on the module release latch, and slide the latch toward the front of

the computer.

4. Grasp the module and pull it out.

5. Slide the new plug-in module into the computer until it clicks into place.

If you have a CD-ROM drive or other module in the module bay, you can connect the

floppy disk drive to the parallel port. See "Using Plug-In Modules" in the online

Reference Guide.

Startup Guide

Table of Contents

Troubleshooting