Using The Floppy Disk Drive; To Connect The Floppy Disk Drive Externally - HP OmniBook 3100 User Manual

Using the Floppy Disk Drive

You can install the floppy disk drive in the plug-in module bay or attach it externally
to the parallel port.
This section describes how to
Connect the floppy disk drive externally.
Insert or eject a floppy disk.

To connect the floppy disk drive externally

If you want to use the floppy disk drive while also using any other OmniBook plug-in
module, you can use the floppy cable (optional accessory F1380A) to connect the
floppy disk drive module to the OmniBook via the parallel port.
1. Connect the floppy cable to the floppy disk drive module and tighten the
knurled thumbscrews.
2. Connect the other end of the floppy disk drive cable to the OmniBook parallel
port, as shown below.
Using OmniBook Plug-In Modules
1-9