HP OmniBook 2100 User Manual page 12

Using Your Smart Card
When properly set up, the HP Smart Card Security System ensures only
users with your smart card and the correct PIN (personal identification
number) can use your OmniBook. See page 15 for setup options.
Starting or Logging On To Your OmniBook
To start or log on to your OmniBook, insert your smart card into the reader
and enter your PIN if prompted.
Note If the PIN is entered incorrectly seven times, the smart card will be
automatically locked (disabled) to ensure the OmniBook's security. Once
disabled, the smart card is permanently unusable and should be discarded.
If you don't have a smart card BIOS, the normal BIOS password and NT
logon provide security.
Logging Off or Locking Your OmniBook
To lock your OmniBook, remove your card from the reader. The
OmniBook will automatically lock—if the Smart Card Security Manager
is configured to do this. Or you can allow the secure screen saver to
activate.
For Windows NT users, the NT logon options can be changed only by the
administrator.
Undocking Your OmniBook or Resuming From Suspend
To undock your OmniBook or resume from suspend, you must insert the
smart card into the reader and enter your PIN.
Note that you cannot undock your OmniBook while in MS-DOS mode.
First exit back to Windows, then undock.
12 English