Overview of the Setup Procedure
Windows NT requires that an NT administrator set up the Smart Card
Security System on an OmniBook. For a Windows 95/98 system, setup
can be performed by the user.
To ensure the setup procedure is successful, the following steps must be
completed in order:
1. Install the drivers, software, and PCMCIA card reader
2. Initialize a smart card (Windows NT)
3. Update your OmniBook's system BIOS
4. Enable BIOS smart card security
5. Set up a Secure folder on your hard disk
6. Make a recovery file
These steps are discussed on the following pages.
Caution
Do not insert your smart card reader until instructed to do so by the
installation program.
4
English