HP OmniBook 2000 User Manual page 23

3. Connect the floppy drive to the parallel port.
4. Insert the Support Utility floppy disk in the floppy drive.
5. Insert the Recovery CD in the CD-ROM drive.
6. Press CTRL+ALT+DEL, or press the reset button. This restarts your OmniBook
from the floppy drive.
7. When you see a menu of startup options, select option 2—Reinstall All Files.
If you don't have an OmniBook docking system or an OmniBook CD-ROM
drive, select option 1 for instructions. It's a good idea to read this file for the
most up-to-date information.
8. Follow the instructions on your screen. When the process finishes, your hard
disk contains the original files that came with your OmniBook.
Using OmniBook Accessories
Installing a New Hard Drive
1-23