Using OmniBook Accessories
Using the CD-ROM Drive
Using the CD-ROM Drive
You install the CD-ROM drive in the center drive bay of the OmniBook. If you want
to use both the CD-ROM drive and the floppy disk drive, connect the floppy disk
drive to the OmniBook's parallel port.
This section describes how to
Install the CD-ROM drive.
Insert and remove a CD.
Use the CD-ROM drive safely.
To install the CD-ROM drive
If you're using Windows 95
1. If necessary, remove the floppy drive or super battery from the OmniBook.
2. Slide the CD-ROM drive into the OmniBook until it clicks into place.
1-12