Using OmniBook Accessories
Removing Accessory Modules
To remove accessories from the center drive bay
The OmniBook's center drive bay can hold a CD-ROM drive, a floppy disk drive, or a
high-capacity battery for extra battery power. Use the following procedure to
remove any of these devices from the OmniBook.
1. Slide the switch to the right. A pull-tab pops out.
2. Pull the pull-tab firmly to remove the module from the OmniBook.
3. Push the pull-tab back into the module after you remove the it from the
OmniBook.
Slide switch to release pull-tab.
1-8